However, both the drum and a belt sander can do the job if you have a little patience and plenty of time. Normally, sanders are used to get a fine finish to the wood and not thin the material in any great way.
Router sled how to#
Here is a video that explains how to build a router sled to flatten large slabs of wood. So, be prepared to use a sander to smooth out the surface if you want a quality finish to the material. But even the best result with the router is not going to be as smooth compared to a planer or table saw. Once the board is secure and the router set to the desired depth, the work may go surprisingly fast. This means working in the direction of the grains for the best result. Be sure to position the board so that you can easily push the router across all the way. You will need to secure the wood with a jig or clamps so that the board stays securely to the platform. Otherwise, you may need to build one or purchase one. If you have a sled, then you are ready to go.
To flatten wood with a router you will need to make a router sled or jig. In this case, you are simply expanding that design to cover the entire top layer of the wood itself. When you think about it, a wood router is a type of planer that takes away layers of wood to create specific designs. You may not think of a router as being a good substitute for a planer, but it does do the job quite well if you properly secure the wood. What happens when you need to thin the wood, but do not have a planer to do the job? No problem, there are other tools at your disposal that can plane the wood effectively to get the results that you desire.
0 kommentar(er)
